ZyXEL Communications GS-4012 - Manual (Page 366)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
366
priority <0-61440> Sets the bridge priority of the
Switch.
13
ssh known-hosts
ip> <1024|ssh-
rsa|ssh-dsa>
Adds a remote host to which the
Switch can access using SSH
service.
13
storm-
control Enables broadcast storm control
on the Switch.
13
subnet-
based-vlan Enables subnet based VLAN on
the Switch.
13
dhcp-vlan-override Sets the Switch to force the
DHCP clients to obtain their IP
addresses through the DHCP
VLAN.
13
name
source-ip
mask-bits bits> vlan
priority <0-7> Specifies the name, IP address,
subnet mask, VLAN ID of the
subnet based VLAN you want to
configure along with the priority
you want to assign to the
outgoing frames for this VLAN.
13
inactive Disables the subnet based
VLAN.
13
syslog Enables syslog logging. 13
server address> inactive Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7] Sets the IP address of the syslog
server and the severity level.
13
type
facility [local 1
..7] Sets the log type and the file
location on the syslog server.
13
tacacs-
accounting host Specifies the IP address of
TACACS+ accounting server 1
or TACACS+ accounting server
2 (index = 1 or index = 2).
13
[acct-port
number>] [key
] Sets the port number and key of
the external TACACS+
accounting server.
13
timeout <1-1000> Specifies the TACACS+
accounting server timeout value.
13
tacacs-
server host Specifies the IP address of
TACACS+ server 1 or TACACS+
server 2 (index = 1 or index = 2).
13
[auth-port
number>] [key
] Sets the port number and key of
the external TACACS+ server.
13
timeout <1-1000> Specifies the TACACS+ server
timeout value.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE