ZyXEL Communications GS-4012 - Manual (Page 340)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
340
logins Displays login account
information.
3
loopguard Displays which ports have
loopguard enabled as well as their
status.
3
mac address-table
[mac|vid|port]> Displays MAC address table.
You can sort by MAC address,
VID or port.
3
address-table
count Displays the total number of MAC
addresses in the MAC address
table.
3
address-table
static Displays the static MAC address
table.
3
address-table
vlan Displays the static MAC address
table for the specified VLAN.
3
address-table
vlan
Displays the static MAC address
table for the specified VLAN.
Sorted by MAC, Port or type.
3
address-table
port Displays the static MAC address
table for the specified port(s).
3
address-table
port
Displays the static MAC address
table for the specified port(s).
Sorted by MAC, Port or type.
3
mac-aging-time Displays MAC learning aging
time.
3
mac-
authentication Displays MAC authentication
settings for the Switch.
3
mac-
authentication config Displays MAC authentication
settings on a port by port basis
with authentication statistics for
each port.
3
mac-count Displays the count of MAC
addresses learnt.
3
mrstp index> Displays multiple rapid spanning
tree configuration for the specified
tree.
3
mstp Displays MSTP configuration for
the Switch.
3
instance <0-16> Displays MSTP instance
configuration.
3
multicast Displays multicast status,
including the port number, vlan ID
and multicast group number of
multicast group members on the
Switch.
3
vlan Displays multicast VLAN status. 3
multi-login Displays multi-login information 3
mvr DIsplays all MVR settings. 3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE