ZyXEL Communications GS-4012 - Manual (Page 338)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
338
ethernet oam summary Displays the configuration details
of each OAM activated port.
3
garp Displays GARP information. 3
hardware-monitor Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
0
https Displays the HTTPS information. 3
certificate Displays the HTTPS certificates. 3
key Displays the HTTPS key. 3
session Displays current HTTPS
session(s).
3
timeout Displays the HTTPS session
timeout.
3
igmp-filtering profile Displays IGMP filtering profile
settings.
3
igmp-snooping Displays global IGMP snooping
settings.
3
vlan Displays the VLANs on which
IGMP snooping is enabled.
3
querier Displays the IGMP querier mode
settings on each port.
3
interfaces number> Displays current interface status. 3
interfaces config
Displays current interface
configuration.
3
bandwidth-control Displays bandwidth control
settings.
3
bstorm-control Displays broadcast storm control
settings.
3
egress Displays outgoing port
information.
3
igmp-filtering Displays IGMP filtering settings. 3
igmp-group-
limited Displays the IGMP group limit. 3
igmp-immediate-
leave Displays the IGMP Immediate
Leave setting.
3
igmp-query-mode Displays the IGMP query mode for
the specified port(s).
3
ip Displays IP related information. 0
arp Displays the ARP table. 3
dvmrp group Displays DVMRP group
information.
3
dvmrp interface Displays DVMRP interface
information.
3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE