ZyXEL Communications GS-4012 - Manual (Page 179)

Chapter 22 Multicast
GS-4012F/4024 User’s Guide
179
"
Your Switch automatically creates a static VLAN (with the same VID) when
you create a multicast VLAN in this screen.
Figure 87 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 57 Advanced Application > Multicast > Multicast Setting > MVR
LABEL DESCRIPTION
Active Select this check box to enable MVR to allow one single multicast VLAN to be
shared among different subscriber VLANs on the network.
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Multicast VLAN
ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority Select a priority level (0-7) with which the Switch replaces the priority in outgoing
IGMP control packets (belonging to this multicast VLAN).
Mode Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the multicast
VLAN.
Select Compatible to set the Switch not to send IGMP reports.
Port This field displays the port number on the Switch.