ZyXEL Communications GS-4012 - Manual (Page 362)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
362
area
virtual-link
message-digest-
key md5
Enables MD5 authentication and
sets the key ID and key for the
virtual link in the area.
13
area
virtual-link
name Sets a descriptive name for the
virtual link for identification
purposes.
13
exit Leaves the router OSPF
configuration mode.
13
network addr/bits> area
Creates an OSPF area. 13
no area id> Removes the specified area. 13
no area id>
authentication Sets the area to use no
authentication (None).
13
no area id> default-
cost Sets the area to use the default
cost (15).
13
no area id> stub Disables stub network settings in
the area.
13
no area id> stub no-
summary Sets the area to send LSAs (Link
State Advertisements).
13
no area id> virtual-
link id>
authentication-
key Resets the authentication
settings on this virtual link.
13
no area id> virtual-
link id> message-
digest-key Resets the authentication
settings on this virtual link.
13
no area id> virtual-
link id>
authentication-
same-as-area Resets the authentication
settings on this virtual area.
13
no area id> virtual-
link id> Deletes the virtual link from the
area.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE