ZyXEL Communications NBG420N - Manual (Page 83)

Chapter 6 Tutorials
NBG420N User’s Guide
83
Figure 50 VPN Summary
6.2.2 Configuring Jack’s NBG420N VPN Settings
To configure these settings Jack uses the NBG420N web configurator.
1 Log into the NBG420N web configurator and click VPN > Modify icon. This displays
the VPN Rule Setup (basic) screen.
2 Select the Active checkbox to enable the VPN rule after it has been created. Make sure
IKE is selected as the IPSec Keying Mode.
Figure 51 Property
3 Enter the IP address “10.0.0.7” in the Local Address text box. This is the IP address of
Jack’s computer. Enter the IP address “10.0.0.7” in the Local Address End/Mask text
box. This value is the same as Jack only wants Bob to access this single IP address.
Figure 52 Local Policy
4 Enter the IP address “192.168.1.35” in the Remote Address Start text box. This is the
IP address of Jack’s computer. Enter the IP address “192.168.1.35” in the Remote
Address End/Mask text box. This value is the same as Bob only wants Jack to access
this single IP address.
Figure 53 Remote Policy
5 Enter the IP address “2.2.2.2” in the My IP Address text box. This is Jack’s WAN IP
address.