ZyXEL Communications NBG420N - Manual (Page 134)

Chapter 10 DHCP
NBG420N User’s Guide
134
10.3 DHCP Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC addresses. You can also use this screen to configure the DNS server
information that the NBG420N sends to the DHCP clients.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your NBG420N’s static DHCP settings, click Network > DHCP > Advanced. The
following screen displays.
Figure 87 Network > DHCP > Advanced
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG420N.
Reset Click Reset to begin configuring this screen afresh.
Table 50 Network > DHCP > General
LABEL DESCRIPTION
Table 51 Network > DHCP > Advanced
LABEL DESCRIPTION
Static DHCP Table
# This is the index number of the static IP table entry (row).
MAC Address Type the MAC address (with colons) of a computer on your LAN.
IP Address Type the LAN IP address of a computer on your LAN.