ZyXEL Communications NBG420N - Manual (Page 71)

Chapter 5 AP Mode
NBG420N User’s Guide
71
5.4.2 WLAN and Maintenance Settings
The configuration of wireless and maintenance settings in AP Mode is the same as for Router
Mode.
• See Chapter 5 on page 69 for information on the configuring your wireless network.
• See Maintenance and Troubleshooting (227) for information on the configuring your
Maintenance settings.
5.5 Logging in to the Web Configurator in AP Mode
1 Connect your computer to the LAN port of the NBG420N.
2 The default IP address if the NBG420N is “192.168.1.1”. In this case, your computer
must have an IP address in the range between “192.168.1.2” and “192.168.1.255”.
3 Click Start > Run on your computer in Windows.
4 Type “cmd” in the dialog box.
5 Type “ipconfig” to show your computer’s IP address. If your computer’s IP address is
not in the correct range then see Appendix D on page 293 for information on changing
your computer’s IP address.
6 After you’ve set your computer’s IP address, open a web browser such as Internet
Explorer and type “192.168.1.1” as the web address in your web browser.
See Chapter 6 on page 73 for a tutorial on setting up a network with an AP.
Apply Click Apply to save your changes to the NBG420N.
Reset Click Reset to reload the previous configuration for this screen.
LABEL DESCRIPTION