ZyXEL Communications NBG420N - Manual (Page 43)

Chapter 3 Introducing the Web Configurator
NBG420N User’s Guide
43
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to partition your LAN interface into subnets.
Advanced Use this screen to enable other advanced properties.
DHCP
Server
General Use this screen to enable the NBG420N’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
Client List Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host name).
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG420N.
Advanced Use this screen to change your NBG420N’s port triggering settings.
DDNS General Use this screen to set up dynamic DNS.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Content Filter Filter Use this screen to block certain web features and sites containing
certain keywords in the URL.
Schedule Use this screen to set the days and times for the NBG420N to
perform content filtering.
VPN General Use this screen to configure VPN connections and view the rule
summary.
SA Monitor Use this screen to display and manage active VPN connections.
Management
Static Route IP Static
Route
Use this screen to configure IP static routes.
Bandwidth
MGMT
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a
bandwidth management rule.
Monitor Use this screen to view the NBG420N’s bandwidth usage and
allotments.
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the
NBG420N.
Telnet Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
NBG420N.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the NBG420N.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the
NBG420N.
UPnP General Use this screen to enable UPnP on the NBG420N.
Maintenance
Table 5 Screens Summary
LINK TAB FUNCTION