Table 65 security > vpn > rule setup: manual – ZyXEL Communications NBG420N User Manual

Page 180

Text mode
Original mode

Chapter 15 IPSec VPN

NBG420N User’s Guide

180

15.2.3.3 Authentication and the Security Parameter Index (SPI)

For authentication, the NBG420N and remote IPSec router use the SPI, instead of pre-shared
keys, ID type and content. The SPI is an identification number.

Note: The NBG420N and remote IPSec router must use the same SPI.

Figure 108 Security > VPN > General > Rule Setup: Manual

The following table describes the labels in this screen.

Table 65 Security > VPN > Rule Setup: Manual

LABEL

DESCRIPTION

Property

Active

Select this check box to activate this VPN policy.