3 back to factory defaults, 3 restart screen – ZyXEL Communications NBG420N User Manual
Page 254
Chapter 22 Tools
NBG420N User’s Guide
254
Figure 154 Configuration Restore Successful
The NBG420N automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 155 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NBG420N IP address (192.168.1.1).
See
for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 156 Configuration Restore Error
22.2.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the NBG420N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
NBG420N. Refer to the chapter about introducing the web configurator for more information
on the RESET button.
22.3 Restart Screen
System restart allows you to reboot the NBG420N without turning the power off.