ZyXEL Communications NBG420N - Manual (Page 115)

Chapter 7 Wireless LAN
NBG420N User’s Guide
115
"
If you have not configured your wireless settings yet you can do so by using
the Wizard in the web configurator you access from your computer. Click the
Wizard icon
or the Go To Wizard Setup web link you see after logging
into the web configurator from your computer. See Chapter 4 on page 49 for
more information on using the Wizard.
1 On the iPod Touch’s main screen press Settings and then press Wi-fi.
2 On the list of networks press the NBG420N’s network name (SSID) to connect to it. If
you are prompted for any security settings enter them and press connect.
V
The pre-shared key is case-sensitive. If you have problems connecting then
try checking the security settings in the web configurator from your computer
and try again.
7.11.1 Accessing the iPod Touch Web Configurator
Now that you are connected to the NBG420N’s wireless network you can access the iPod
Touch web configurator. To do this follow the steps below:
1 Launch the iPod Touch’s web browser from the main screen. The default web browser is
Safari.
2 Enter the IP address of the NBG420N into the address bar and go to that address. The
default IP address for the NBG420N is 192.168.1.1.
3 The login screen should display.
Figure 77 Login Screen