ZyXEL Communications NBG420N - Manual (Page 102)

Chapter 7 Wireless LAN
NBG420N User’s Guide
102
Figure 66 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
7.7 Wireless LAN Advanced Screen
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Table 34 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
Active Select Yes from the drop down list box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG420N, MAC addresses not listed will be
allowed to access the NBG420N
Select Allow to permit access to the NBG420N, MAC addresses not listed will be
denied access to the NBG420N.
Set This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG420N in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the NBG420N.
Reset Click Reset to reload the previous configuration for this screen.