ZyXEL Communications NBG420N - Manual (Page 273)

NBG420N User’s Guide
273
A
P P E N D I X
A
Product Specifications and Wall-
Mounting Instructions
The following tables summarize the NBG420N’s hardware and firmware features.
Table 113 Hardware Features
Dimensions (W x D x H) 115 x 162 x 33 mm
Weight 230g
Power Specification Input: 120~240 AC, 50~60 Hz
Output: 12 V DC 1 A
Ethernet ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
4-5 Port Switch A combination of switch and router makes your NBG420N a cost-effective
and viable network solution. You can add up to four computers to the
NBG420N without the cost of a hub when connecting to the Internet through
the WAN port. You can add up to five computers to the NBG420N when you
connect to the Internet in AP mode. Add more than four computers to your
LAN by using a hub.
LEDs PWR, LAN1-4, WAN, WLAN, WPS
Reset Button The reset button is built into the rear panel. Use this button to restore the
NBG420N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Antenna The NBG420N is equipped with two 1.8dBi (2.4GHz) detachable antennas
to provide clear radio transmission and reception on the wireless network.
Operation Environment Temperature: 0º C ~ 40º C
Humidity: 20% ~ 95% RH (Non-condensing)
Storage Environment Temperature: -20º C ~ 60º C
Humidity: 20% ~ 95% RH (Non-condensing)
Distance between the
centers of the holes on
the device’s back.
120 mm
Screw size for wall-
mounting
M4 Tap Screw