ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 61)

Dimension ES-2024 Ethernet Switch
Basic Setting 6-9
Table 6-4 IP Setup
LABEL DESCRIPTION
Management
VID Enter the VLAN identification number associated with the switch IP address. Management VLAN ID
is the VLAN ID of the CPU and is used for management only. The default is "1". All ports, by default,
are fixed members of this "management VLAN" in order to manage the device from any port. If a
port is not a member of this VLAN, then users on that port cannot access the device. To access the
switch make sure the port that you are connected to is a member of Management VLAN.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring the fields again.
6.8 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to enter the port configuration screen. You may
configure any of the switch ports including uplink ports.