ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 166)

Dimension ES-2024 Ethernet Switch
26-2 Command Examples
If you clear a log (using the sys log clear command), you cannot view it again.
26.2.3 sys version
Syntax:
sys version
This command shows the RAS code, firmware version, system uptime and bootbase version.
An example is shown next.
Figure 26-2 sys version Command Example
26.2.4 sys sw vlan1q vlan list
Syntax:
sys sw vlan1q vlan list
where
_VID|end_VID>=
Specify either all of the VLAN entries ( all ), a single VLAN ID ( VID ) or a
range of VLAN IDs starting from a certain VID ( start_VID ) or a range of
VLAN Ids ending at a specific VID ( end_VID ).
This command displays the IEEE 802.1Q tagged VLAN table. An example is shown next.
Figure 26-3 sys sw vlan1q vlan list Command Example
26.2.5 sys sw pktcnt
Syntax:
sys sw pktcnt
This command displays statistics of a port. An example is shown next.
ES-2024> sys version
ZyNOS version: V3.50(LI.0) | 02/15/2004
romRasSize: 1032106
system up time: 0:08:57 (53618 ticks)
bootbase version: V1.00 | 11/20/2003
ES-2024> sys sw vlan1q vlan list all
No. VID ElapsedTime Status EgressPort/UntaggedPort
------ ---- ----------- ------ --------------------------------
1) 1 0:39:52 Static EEEEE|EEEEE|EEEEE|EEEEE|EEEEE|EEE
UUUUU|UUUUU|UUUUU|UUUUU|UUUUU|UUU