ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 155)

Dimension ES-2024 Ethernet Switch
Introduction to CLI 25-5
Table 25-1 Command Summary: sys
COMMAND DESCRIPTION
socket Displays the system socket’s ID #,
type, control block address (PCB),
IP address and port number of
peer device connected to the
socket (Remote Socket) and task
control block (Owner).
snmp getCommunity [] Sets or displays the SNMP
GetRequest community.
setCommunity [] Sets or displays the SNMP
SetRequest community.
trustedHost [] Sets or displays the SNMP trusted
host.
trapCommunity [] Sets or displays the SNMP Trap
community.
trapDest [] Sets or displays the SNMP trap
server.
disp Shows SNMP settings.
cluster active Assign a cluster name and enable
clustering it.
inactive Disable the cluster named.
add Add a member switch into the
cluster using its web configurator
password.
remove Remove a member switch from the
cluster.
showMember Shows details of member switches
in this cluster.
showCandidate Shows a list of auto-discovered
potential cluster members.
status Shows whether this switch is a
cluster member, cluster manager
or neither and information about
members in the cluster.
trace Sets the cluster management
debug level.
telnet [port] Telnets to the specified host.
romreset Sets the switch back to the factory
default settings.
fanstatus Displays the current operational
state of the switch’s fan.
25.2.2 sys sw Commands