ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 154)

Dimension ES-2024 Ethernet Switch
25-4 Introduction to CLI
Table 25-1 Command Summary: sys
COMMAND DESCRIPTION
encapmask [mask] Shows which type of encapsulation
the trace log records or sets it if
you specify the encapsulation’s
hexadecimal character.
trcpacket
create Creates a packet trace buffer.
destroy Removes the packet trace buffer.
channel
[none|incoming|outgoing|bothway]
Sets the packet trace direction for
a given channel.
string [on|off] Enables/disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting.
switch [on|off] Enables/disables packet trace or
displays the current setting.
disp Displays the trace packets.
udp Sends the trace packets to another
system using UDP.
udp switch [on|off] Enables/disables the sending of
the trace packets to another
system using UDP or displays the
current setting.
udp addr Sets the target IP address for
sending trace packets using UDP.
udp port Sets the UDP port (should match
that of the target IP address) for
sending trace packets using UDP.
parse [[start_idx], end_idx] Displays detailed packet details of
the packet range specified.
brief Displays a brief listing of packet
contents.
version Displays the RAS code and driver
versions.
view view Displays the specified text file.
wdog
switch [on|off] Turns the watchdog firmware
protection feature on or off.
cnt [value] Sets (0-34463) or displays the
current watchdog count (in 1.6 sec
units).