1 cluster member switch management, Uploading firmware to a cluster member switch – ZyXEL Communications ZyXEL Dimension ES-2024 User Manual
Page 141

Dimension ES-2024 Ethernet Switch
Cluster Management
22-3
Table 22-2 Cluster Management Status
LABEL DESCRIPTION
Status This field displays:
o Online (the cluster member switch is accessible)
o Error (for example the cluster member switch password was changed or the switch was
set as the manager and so left the member list, etc.)
o Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after the
link between cluster member and manager goes down).
22.2.1
Cluster Member Switch Management
Go to the Clustering Management Status screen of the cluster manager switch and then select an Index hyperlink
from the list of members to go to that cluster member switch's web configurator home page. This cluster member
web configurator home page and the home page that you'd see if you accessed it directly are different (see Figure
22-3).
Figure 22-3 Cluster Member Web Configuration Screen Example
Uploading Firmware to a Cluster Member Switch
You can use FTP to upload firmware to a cluster member switch through the cluster manager switch as shown in
the following example.
Cluster Manager
Menus
Cluster Member
Menus