ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 162)

Dimension ES-2024 Ethernet Switch
25-12 Introduction to CLI
Table 25-4 Command Summary: ip
COMMAND DESCRIPTION
httpd debug [on|off] Enables or disables the HTTP
debug flag.
icmp
status Displays the ICMP statistics
counter.
discovery [on|off] Sets the ICMP router discovery
flag.
ifconfig [iface] [ipaddr] [broadcast
|mtu |dynamic]
Configures a network interface.
ping Pings a remote host.
route
status Displays the routing table.
add [/]
[]
Adds a route.
addiface [/]
[]
Adds an entry to the routing table
for the specified interface.
addprivate [/]
[]
Adds a private route.
drop [/] Drops a route.
status Displays IP statistic counters.
udp status Displays the UDP status.
tcp
status [tcb] [] Displays the TCP statistic
counters.
telnet [port] Telnets to the specified host.
traceroute [ttl] [wait] [queries] Sends ICMP packets to trace the
route of a remote host.
igmpsnoop
status Displays the IGMP group table.
querier Displays the port number of the
incoming port that received the
latest IGMP querier.
enable Turns on IGMP snooping.
disable Turns off IGMP snooping.
dhcp mode Set an interface to accept
information from a DHCP server.
dhcp status Show whether an interface can
accept information from a DHCP
server.