ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 177)

Dimension ES-2024 Ethernet Switch
IEEE 802.1Q Tagged VLAN 27-5
27.4.6 vlan1q port status
Syntax:
sys sw vlan1q port status
This command shows information about the specified port’s VLAN settings.
The following example shows the settings for port 1.
Figure 27-7 vlan1q port status Command Example
27.4.7 vlan1q port default vid
Syntax:
sys sw vlan1q port defaultVID
where
= A port number
= The VLAN ID. Valid parameter range = [1 – 255].
This command sets a default VLAN ID for all untagged packets that come in through the specified port.
The following example sets the default VID of port 1 to 200.
Figure 27-8 vlan1q port default vid Command Example
27.4.8 vlan1q port accept
Syntax:
sys sw vlan1q port accept
where
= A port number
= Specifies all Ethernet frames (tagged and untagged) or only tagged
Ethernet frames.
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets port 2 to accept only tagged frames.
ES-2024> sys sw vlan1q port status 1
Port 1 VLAN Setup :
Default VLAN ID = 1
VLAN Acceptable Type = All
GVRP = DISABLE
ES-2024> sys sw vlan1q port defaultVID 1 200