ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 185)

Dimension ES-2024 Ethernet Switch
Product Specifications A-1
A Product Specifications
These are the ES-2024 product specifications.
Chart 1 General Product Specifications
Standards
IEEE802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control
IEEE802.1p Priority Queues
IEEE802.1q VLAN
IEEE802.1d Spanning Tree
IEEE 802.1x Authentication
IEEE 802.3ad Link Aggregation
IEEE 802.1w Rapid Spanning Tree
IEEE 802.3z Gigabit
IEEE 802.3ab Gigabit
Protocol CSMA/CD
Interface
24 10/100 Mbps Ethernet ports
Two 100/1000 Mbps Ethernet ports
Two mini GBIC slots for mini GBIC transceivers (SFP module)
One console port
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps(full duplex)
Gigabit Ethernet: 2000Mbps (full duplex)
Rates with mini GBIC transceivers depend on the transceiver used (see your
transceiver’s documentation)
Network Cables
10BASE-T: 2-pair Unshielded Twisted Pair (UTP) Cat.3, 4, 5 (100 meters)
EIA/TIA-586 100-ohm Shielded Twisted Pair (STP) (100 meters)
100BASE-TX, 1000BASE-T: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm STP
(100 m max.)
Cables for use with mini GBIC transceivers depend on the transceiver used (see
your transceiver’s documentation)
Full/Half Duplex
Full/half duplex for 10/100 Mbps speeds
Full duplex only for gigabit speeds
For the mini-GBIC modules, see your transceiver’s documentation
Media Interface Exchange All ports are auto-crossover (auto-MDI-X) and auto-negotiating.