ZyXEL Communications ZyXEL Dimension ES-2024 - Manual (Page 159)

Dimension ES-2024 Ethernet Switch
Introduction to CLI 25-9
Table 25-2 Command Summary: sys sw
COMMAND DESCRIPTION
enable Enables 802.1X security on the
switch.
disable Disables 802.1X security on the
switch.
status Shows switch 802.1X security
status.
port
enable Enables 802.1X security on the
specified port.
disable Disables 802.1X security on the
specified port.
reauth Turns re-authentication on or off
on the specified port.
period Configures how often the
specified port should be re-
authenticated.
status Displays 802.1X security status
on the specified port.
set
radius server Sets the external RADIUS server
IP address.
radius secret Sets the external RADIUS server
password.
radius port Sets the external RADIUS server
port number.
radius show Displays the external RADIUS
server settings.
bmstorm These commands relate to
broadcast storm control.
enable Turns on broadcast storm control.
disable Turns off broadcast storm control.
disp Displays broadcast storm control
ports’ settings.
set
4(20%) 5(25%)>
Specifies the threshold
percentage of broadcast frames
that triggers broadcast storm
control.
mac static Displays static MAC addresses.
display [ ] Displays current run-time static
MAC addresses on the ports.
set Configures a static MAC address
on the specified port.