Texas Instruments MSP50C614 - Manual (Page 218)

Individual Instruction Descriptions
4-126
Description Copy value of src string to dest string. Premodification of accumulator pointers
is allowed with some operand types.
Syntax Description
MOVS A n[~], {adrs} Move data memory word string to A n[~] string
MOVS { adrs}, An[~] Move A n[~] string to data memory
MOVS { adrs}, *An Move program memory string at *A n to data memory
MOVS A n[~], pma16 Move program memory string to A n[~] string
MOVS A n, An~ Move A n~ string to An
MOVS A n~, An Move A n string to An~ string
MOVS A n[~], PH Move product high reg to A n[~], string mode. This instruction ignores the string
count, executing only once but maintains the CF and ZF status of the previous
multiply or shift operation as if the sequence was a single string.
MOVS A n[~], *An[~] Move program memory string at *A n[~] to An[~]
See Also MOVU, MOV, MOVT, MOVB, MOVBS
Example 4.14.31.1 MOVS A2~, *R6
Load the string pointed by R6 to accumulator string A2~.
Example 4.14.31.2 MOVS *R4, A2~
Copy the accumulator string A2~ to data memory location pointed by R4.
Example 4.14.31.3 MOVS *0x0100 * 2, *A0
Transfer the program memory word string pointed by content of A0 to the data memory word location
0x0100. This is a lookup instruction.
Example 4.14.31.4 MOVS A2~, 0x1400
Transfer program memory string at 0x1400 to accumulator string A2~.
Example 4.14.31.5 MOVS A1, A1~
Transfer accumulator string A1~ to accumulator string A1.
Example 4.14.31.6 MOVS A1~, A1
Transfer accumulator string A1 to accumulator string A1~.
Example 4.14.31.7 MOVS A2, PH
Transfer value in PH to accumulator string A2. PH is copied to the second word of the string.