Tektronix PHASER 380 - Manual (Page 76)

3 Printing Basics
3-6 Phaser 380 Color Printer
Using the Tektronix driver for Windows 3.1
To select printing options, follow these steps:
1. From the Control Panel, double-click the Printers icon.
2. In the Printers dialog box, choose your printer from the list of
installed printers.
3. Click the Set As Default Printer button if you want to select your
printer as the default.
4. Click the Connect button; the Connect dialog box appears.
5. Select the port your printer is connected to.
The printerÕs conÞguration page contains the information you
need to set up the printerÕs port. Refer to ÒPrinting Help Pages
from the front panelÓ on page 2-30 for instructions on printing a
ConÞguration Page.
Note You can use CONNECT TO FILE to save a document as a
PostScript Þle instead of sending it to the printer. For more
information, see your Microsoft Windows documentation.
Interface Select Then do the following
Parallel LPTx Go to Step 6.
Serial COMx Go to Step 6.
Network Network port
(LPTx or COMx) 1. Click the Network button to open
the Printers-Network
Connections dialog box.
2. Fill in each item based on your
configuration, then click OK.
Refer to your Microsoft Windows
documentation for details, or ask
your network administrator for help.