Tektronix PHASER 380 User Manual
Page 176
5
Caring for Your Printer
5-40
Phaser 380 Color Printer
6.
Remove the upper media tray from the printer and the following
message appears:
Turn Lower Tray Rollers
Clean Cancel
7.
To clean the lower paper trayÕs rubber transport rollers, wet the
front and back sides of a cleaning card and place it into the slot
provided on the top of the Lower Paper Tray Assembly. Starting
at the far left side of the printer, push the cleaning card down into
the slot until it contacts the rubber transport rollers.
Note
Guide marks molded into the Lower Paper Tray Assembly
indicate the left and right boundaries of the area to be cleaned.
8.
While Þrmly holding the cleaning card against the rollers, press
the
Clean
button on the front panel to turn the rollers. Each
button press turns the rollers several revolutions.
9.
After the printer turns the rollers several times, move the cleaning
card to the right to continue cleaning the lower transport rollers.
10.
Repeat Steps 7 and 8 until all rollers have been cleaned. Press the
Exit
button and replace the media tray in the printer.
9662-81