Tektronix PHASER 380 - Manual (Page 40)

2 Getting Set Up
2-22 Phaser 380 Color Printer
PhaserShare network and serial connections
Optional PhaserShare cards provide Ethernet, Token Ring, or
LocalTalk/Serial connections for the printer. PhaserShare network cards
offer high performance and ßexible workgroup connectivity. All data input
ports and network protocols are simultaneously active. Print jobs are
processed on a Þrst-come, Þrst-served basis.
PhaserShare cards can be purchased initially with the printer or later as a
separate upgrade kit. For ordering information, refer to ÒPhaserShare
network cards (recommended)Ó on page 8-7.
Installing PhaserShare™ network cards
The PhaserShare Network Cards and Software System Administrator Manual
contains detailed information on installing, conÞguring and using the
optional network interfaces.
Caution Observe static electricity precautions when installing a
PhaserShare network card.
1. Power down the printer. Do not unplug the printer; this preserves a
ground path to dissipate static charges. Unpack the network card.
Note The Token Ring Network Card requires jumpers to be properly
positioned on the network card to support the speed of the network.
2. Remove the network card cover plate from the rear panel of the
printer. Slide the network card into the card slot and Þrmly push
it into place. Secure the card in place with its thumbscrews.
3. Connect the appropriate network interface cable to one end of the
network cardÕs connectors.
9109-17
Smart Card
Ethernet®