Tektronix PHASER 380 - Manual (Page 241)

Using the Front Panel 7
User Manual 7-9
Selecting the cleaning page source
The printer picks sheets of paper from a designated media tray as part of its
self-maintenance and jam recovery routines. The default cleaning page
source for the printer is the upper tray. When the Lower Paper Tray
Assembly is installed, you can change the source of the cleaning page to the
lower tray to prevent the printer from using transparencies or letterhead
loaded in the upper paper tray.
You can change the cleaning page source through the front panel or by
sending a PostScript language Þle to the printer (refer to the printerÕs
CD-ROM). To change the cleaning page source from the printerÕs front
panel, follow these steps:
1. While the
Ready
message or the printerÕs name is displayed,
press the
Menu
button. The printer displays the setup menu:
Help Pages
<---- ----> Menu
2. Using the left arrow
(<----)
or right arrow
(---->)
buttons,
scroll through the selections until the following message appears:
Printer Defaults
<---- ----> Menu
3. Press the
Menu
button to access the printer defaults settings.
4. Using the left arrow
(<----)
or right arrow
(---->)
buttons,
scroll through the selections until the following message appears:
Cleaning Page Source
<---- ----> Menu
5. Press the
Menu
button to access the cleaning page source settings.
Cleaning Page Source:Upper
<---- ----> OK
6. Scroll through the settings until you reach the one you want. Press
the
OK
button to conÞrm the setting.
7. To return to the top level of the menu, press the Exit button until
the printer displays the
Ready
message.