Tektronix PHASER 380 - Manual (Page 217)

Troubleshooting 6
User Manual 6-25
Check the printer’s language mode
If your Þle doesnÕt print, the language on the printerÕs port you are using
may have been changed.
1. Print a copy of the printerÕs ConÞguration Page to see the language
mode on each port. Refer to the on-line manual on the printerÕs
CD-ROM for instructions on printing a ConÞguration Page.
2. If the printer port you are using has the wrong language set for the
type of application you are using, send one of the following utility
Þles to the printer:
■
To print PostScript Þles, use the PSCRIPT.PS Þle to set up a port to
receive PostScript. Refer to the on-line manual on the printerÕs
CD-ROM for details.
■
To print HP-GL Þles, use the HPGL.PS Þle to set up a port to receive
HP-GL. Refer to the on-line manual on the printerÕs CD-ROM for
details.
■
To print PostScript, or HP-GL, or Monochrome PCL5 Þles
interchangeably, use the AIS.PS Þle to set up a port for automatic
language selection. Refer to the on-line manual on the printerÕs
CD-ROM for details.