Tektronix PHASER 380 - Manual (Page 114)

3 Printing Basics
3-44 Phaser 380 Color Printer
Duplex printing
The printer supports duplex printing from the manual-feed slot.
Note Frequent duplexing increases the need to perform paper feed roller
cleaning procedures. Refer to ÒIdentifying cleaning proceduresÓ on
page 5-16 for more information.
When you manually feed a paper sheet for second-side (duplex) printing,
youÕll need to rotate the paper differently depending on whether you are
printing portrait or landscape images.
Note When printing two-sided landscape documents, maintain a
minimum margin of 9mm (0.35 in.) on the leading and trailing
(narrow) edges of the paper. Maintaining at least a 9mm margin
lets you to avoid offset problems between the front and back sides of
your document. If your application allows, you can rotate either
the front or the back side image 180¡ to avoid margin offset issues.
a. Portrait duplex printing
b. Landscape duplex printing
Note A jam error will occur if you feed the second sheet of media into
the manual-feed slot before the front panel prompts you.
2
3
1 2
3
1
9662-93
a b