Tektronix PHASER 380 - Manual (Page 142)

5 Caring for Your Printer
5-6 Phaser 380 Color Printer
4. Lift one end of the blue waste liner by its handle to release it from
the maintenance tray; remove the waste liner from the
maintenance tray.
5. Empty the contents of the waste liner by twisting it. Used ink is
nontoxic; it can be treated as normal ofÞce waste.
Caution Do not load used ink into the printer. Reusing waste ink ruins
the printhead and invalidates the printer warranty.
6. Replace the waste liner in the maintenance tray.
a. Place the side opposite the handle into the maintenance tray
Þrst.
b. Press down Þrmly on the handle end of the waste liner to lock
it into place. Make sure that the waste liner is fully seated in
the maintenance tray.
Note If you break a waste liner, you can obtain a replacement waste
liner from Tektronix (order number 436-0308-00).
7. Replace the maintenance tray in the printer.
8. Close the front cover.
4 5 6
9662-30