Tektronix PHASER 380 - Manual (Page 106)

3 Printing Basics
3-36 Phaser 380 Color Printer
Changing media sizes. The media tray uses two adjustable, blue-colored
guides to hold paper and transparency media in position. Each guide has
two tabs that operate independently. To adjust a guide, press both tabs at
the same time and slide the guide in or out to position it against the media.
1. Tab number 1 controls the stop position of the guide at seven Þxed
media sizes: Executive, A4, Letter, Legal, Tabloid, A3 and Tabloid
Maximum.
2. Tab number 2 controls the stop position of the guide in small
increments for all other (custom) media sizes.
Note If tab number 1 in the rear of the tray is not locked in one of seven
Þxed-media positions, the printer sees the media as a custom size and
must measure the media during the Þrst print job to determine the
actual media size. Image clipping can occur when the printer
encounters ÒunknownÓ media sizes.
9662-64
2
1
1
2