Tektronix PHASER 380 User Manual
Page 51
Getting Set Up
2
User Manual
2-33
6.
The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next. The Add
Printer Wizard program is automatically launched.
Note
The setup instructions remain visible while the Add Printer
Wizard is running. If you click on the instructions dialog box,
press the
7.
In the Add Printer Wizard, click Next in the opening dialog box.
8.
Select your printerÕs connection, either Local Printer or
Network Printer, and click Next.
9.
In the Manufacturers/Printers dialog box, click Have Disk.
10.
Type in the drive for the CD-ROM or diskette, and click OK.
11.
Select your printer, and click Next:
■
Tektronix Phaser 380 (standard printer conÞguration)
■
Tektronix Phaser 380 Extended (Extended Features option)
If you are not sure which version of the printer you have, check
the printerÕs Startup Page for Extended Features: Yes or No.
12.
Select the port or network queue your printer is connected to, and
click Next.
13.
Enter a name for the printer, and select the Phaser 380 as the
default printer if desired, and click Next.
14.
Decide if you want to print a test page, Yes or No, and click
Finish.
15.
In the Installation Completed dialog box, click Finish.
16.
You may see a Restart Windows dialog box if the system needs to
update some Þles. Decide if you want to restart now or later, and
click OK.
Note
See the ÒAdobe PostScript Printer Driver User GuideÓ on the
printerÕs CD-ROM (USERGUIDE.PDF) for detailed
information on the AdobePS 4 driver.