Raritan Computer Home Security System User Manual

Page 234

Chapter 15: Advanced Administration

216

•

Specify at most one Default Gateway in the Network Setup panel in
CC-SG. Use Diagnostic Console to add more static routes if needed.
See

Edit Static Routes

(on page 278).

To configure IP Isolation mode in CC-SG:

1. Choose Administration > Configuration.

2. Click the Network Setup tab.

3. Select IP Isolation mode.

4. Type the CC-SG hostname in the Host name field. See

Terminology/Acronyms

(on page 2) for hostname rules. When you

click Update Configuration to save the configuration, the Host name
field will be updated to reflect the Fully-Qualified Domain Name
(FQDN) if a DNS and domain suffix have been configured.

5. Configure the Primary LAN in the left column, and the Secondary

LAN in the right column.

6. Click the Configuration drop-down arrow and select either DHCP or

Static.

DHCP:

If you choose DHCP, the Primary DNS, Secondary DNS, Domain

Suffix, IP address, Subnet mask, and Default gateway fields will
be automatically populated (if your DHCP server is configured to
provide this information), once you save this network setup and
restart CC-SG.

With the information the DHCP server provides, CC-SG registers

itself dynamically with the DNS server if it accepts dynamic
updates.

See

Recommended DHCP Configurations for CC-SG

(on

page 217).

Static:

If you choose Static, type Primary DNS, Secondary DNS,

Domain Suffix, IP address, and Subnet mask in the appropriate
fields.

Specify only one Default gateway, not both.

7. Click the Adapter Speed drop-down arrow and select a line speed

from the list. Make sure your selection agrees with your switch's
adapter port setting. If your switch uses 1 Gig line speed, select
Auto.

8. If you selected Auto in the Adapter Speed field, the Adapter Mode

field is disabled, with Full Duplex selected automatically. If you
specified an Adapter Speed other than Auto, click the Adapter Mode
drop-down arrow and select a duplex mode from the list.

9. Click Update Configuration to save your changes. CC-SG restarts.