Ricoh 220-240 V User Manual

Page 52

Preparing for Printing

Click [Network Printer], and then click [OK].

Double-click the computer name you want to use as a print server in the
[Browse for Printer]

window.

Select the printer you want to use, and then click [OK].

Check that the port of the selected printer is displayed in [Port:].

Configure the [User Code] as necessary.
For an RPCS printer driver, a User Code can be set after the printer driver in-
stallation. For information about User Code, see the printer driver Help.

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].
The printer driver installation starts.

After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.

Note

❒ Auto Run may not work with certain operating system settings. If this hap-

pens, launch “Setup.exe” on the CD-ROM root directory.

❒ To stop installation of the selected software, click [Cancel] before installa-

tion is complete.

Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.61 “If a
Message Appears during Installation”.