Ricoh 220-240 V - Manual (Page 197)

Host Interface Menu
187
5
❖ IEEE 802.11b
You can make settings for wireless LAN. This menu appears only when the
optional 802.11b interface unit is installed.
❖ Communication Mode
You can select the transmission mode for IEEE 802.11b.
• 802.11 Ad hoc
• Infrastructure
• Ad hoc
Note
❒ Default: 802.11 Ad hoc
❒ Communication Mode can also be set using a Web Image Monitor. For
details, see Web Image Monitor Help.
❖ SSID Setting
You can set an SSID in the infrastructure mode and the 802.11 Ad hoc
mode.
Note
❒ Default: blank (ASSID)
❒ Select [?] to enter [/] for the SSID. Also, [¥] appears when printing the
configuration page, read it as [/].
❒ Characters used are ASCII 0x20-0x7e (32 bytes).
❒ An SSID is set automatically to the nearest access point if no SSID has
been set.
❒ If no SSID has been set for the 802.11 ad hoc mode, an SSID is set auto-
matically and the same SSID is used for the 802.11 ad hoc mode and the
infrastructure mode.
❒ If blank is specified in SSID for 802.11b adhoc mode or adhoc mode,
“ASSID” appears.
❒ An SSID can also be set using Web Image Monitor. For details, see Web
Image Monitor Help.
❖ Channel
You can select channels: 1-14 ( )/1-11 ( ).
Note
❒ Default: 11 (
and )