Using autonet – Ricoh 220-240 V User Manual

Page 352

Text mode
Original mode

Appendix

342

Using AutoNet

If the printer IPv4 address is not assigned by a DHCP server automatically, a
temporary IPv4 address starting with 169.254, which is not used on the network,
can be automatically selected by the printer.
You must change this setting to “on” to use AutoNet.

Note

❒ The IP address assigned by the DHCP server is given priority over that select-

ed by AutoNet.

❒ You can confirm the current IPv4 address on the configuration page.
❒ For more information about the configuration page, see p.164 “Interpreting

the configuration page”.

❒ When AutoNet is running, the NetBIOS name is not registered on the WINS server.
❒ The printer cannot communicate with devices that do not have the AutoNet

function. However, this printer can communicate with Macintosh computers
running Mac OS X 10.2.3. or higher.

Reference
See p.224 “autonet”.