Ricoh 220-240 V User Manual

Page 25

Using the SmartDeviceMonitor Port

Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.

Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.

Click [OK].

Check that the port of the selected printer is displayed in [Port:].

Set a [User Code], if necessary.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].
Installation starts.

After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.

Note

❒ Auto Run may not work with certain operating system settings. If this hap-

pens, launch “Setup.exe” on the CD-ROM root directory.

❒ This allows a SmartDeviceMonitor for Admin user to display and check

the number of sheets each user prints. For details, see SmartDeviceMonitor
for Admin Help.

❒ To stop installation of the selected software, click [Cancel] before installa-

tion is complete.

Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.61 “If a
Message Appears during Installation”.