Nortel Networks M3110 - Manual (Page 78)

Page 78 of 504 Attendant consoles
553-3001-367 Standard 3.00 August 2005
QMT2 feature enabled
When the QMT2 feature is enabled, the following conditions apply:
• If the console is not in Shift mode, the keys in strip AK and/or BK
function as Incoming Call Identification (ICI) keys.
• If the console is in Shift mode, the keys in keystrips AK and BK function
as Trunk Group Busy (TGB) keys. That is, they imitate the keystrips of
the QMT2 add-on module as follows:
— The LCD indicators pointing to the left indicate busy trunks.
— The LCD indicators pointing to the right indicate incoming calls.
Attendant PC requirements
To install the PC-based Console software application, a PC-compatible
Pentium system is required, with the following:
• minimum 16 MB RAM
• hard disk with at least 10 MB free disk space
• 17-inch SVGA color monitor
• 16 bit sound board
• Network interface adapter
• RS232 serial port
For complete installation and operation instructions, refer to the
Attendant PC: Description, Installation, and Operation (553-3001-320).