Nortel Networks M3110 - Manual (Page 451)

Appendix D: M2317 telephone Page 451 of 504
Telephones and Consoles Description, Installation, and Operation
Asynchronous Data Option
See “Asynchronous Data Option” on page 423 for more information on ADO
requirements.
Established Hold Call held by other party (voice) no soft keys shown
User status Leave telset msg for set’s status
(voice) no soft keys shown
Display The user has operated the feature
key “DSP” to display the speed/
system speed call numbers (voice
or data) SPEED#, EXIT
Program The user has operated a feature
key that requires user-input such
as Auto Dial or Controlled Class of
Service (COS) no soft keys shown
Data call initiation The user pressed data DN key to
make a data call (data)
Data call dialing Transmitting dialed digits (data) no soft keys shown
Data call busy Called party off-hook (data) RINGAGN, SAVE#
Data call reorder Called party is unavailable (data) no soft keys shown
Data call ringback Called party is ringing (data) SAVE#
Data call ERWT call
back Initial set of routes not available.
Set gets Expensive Route
Warning Tone (ERWT). RINGAGN, SAVE#
Data call established Connection made (data) SAVE#
Table 74
M2317 states and associated soft keys (Part 3 of 3)
Screen state State Softkey display
CALL , SPEED#,
SAVED#, LAST#