Nortel Networks M3110 - Manual (Page 209)

M3900 installation and configuration Page 209 of 504
Telephones and Consoles Description, Installation, and Operation
TN
l s c u
Terminal number
Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
If confirmed as 3903V or 3904V, the loop must be a phantom. If
confirmed as 3903H or 3904H, the loop must NOT be a phantom.
c u Format for Small System, CS 1000S system, Media Gateway 1000B,
and Media Gateway 1000T, where c = card and u = unit.
Input only the card and unit address. If confirmed as 3903V or 3904V,
the card must be a phantom (card slots 61-80).
If the telephone has an Analog Terminal Adapter (ATA), then use the
voice Terminal Numbers 16-31.
... ... ...
DES d...d Designator
d...d = represents an Office Data Administration System (ODAS)
Station Designator of 1-6 alphanumeric characters
... ... ...
CUST xx Customer number as defined in LD 15
... ... ...
LD 11 – Configure the M3900 Series Digital Telephone (Part 2 of 5)
Prompt Response Description