Nortel Networks M3110 - Manual (Page 212)

Page 212 of 504 M3900 installation and configuration
553-3001-367 Standard 3.00 August 2005
KEY xx aaa yyyy
zzz
Telephone function key assignments where:
xx = key number
aaa = key name or function
yyyy, zzz = additional information required
Refer to the Key description table for each M3900 telephone:
“M3901 key description” on page 159
“M3902 key description” on page 161
“M3903 key description” on page 162
“M3904 key description” on page 166
“M3905 key description” on page 169
MTAD (CS 1000 and Meridian 1 Time and Date) - the system puts a
block on the time/date key on all the M3900 Series Meridian Digital
Telephones
Note 1: VTN primary DN cannot be a primary DN for any other TN,
and the VTN must be defined as a MARP TN.
Note 2: The DN of a Virtual Terminal cannot be defined on a Host
Terminal, and the Host Terminal DN cannot be defined on a Virtual
Terminal.
... ... ...
LD 15 – Assign a default language and customize Set-to-Set Messages (Part 1 of 3)
Prompt Response Description
REQ: NEW
CHG Add new data
Change existing data
TYPE: FTR Features and options
LD 11 – Configure the M3900 Series Digital Telephone (Part 5 of 5)
Prompt Response Description