Pioneer AVIC-Z3 - Manual (Page 76)

Setting the Vehicle Dynamics
Display
You can change the contents of the meters on
the left and right of the
Vehicle Dynamics Dis-
play.
Until the sensor
’s initial learning is complete,
only the voltage and clock are available.
p The speed displayed is a guideline and may
not correspond to the actual speed.
1 Switch to Vehicle Dynamics Display.
= For more details about “Changing the map
display mode
”, refer to Switching the view
mode on page 38
2 Touch the left or right meter.
Touch panel keys are displayed.
3 Touch the items you want to display.
You can select the following items:
[
Voltage]:
Displays the power supply and voltage sup-
plied from the battery to this system.
[
Acceleration]:
Acceleration in a forward direction is dis-
played. The
+ sign indicates acceleration while
the - sign indicates deceleration.
[ Side Acceleration]:
Acceleration in a side direction such as when
turning, is displayed. The
+ sign indicates a
right turn, while the - sign indicates a left turn.
[ Angular Velocity]:
Displays the vehicle
’s turning angle over one
second (how far it has turned in a second).
[
Slope]:
Displays the vehicle
’s vertical movement. +
side represents the rising angle, and - side the
falling angle.
[
Direction]:
Displays the direction your vehicle is traveling
in.
[
Clock]:
Current time is displayed.
[
Adjust Look]:
Touch [ Adjust Look] to display a screen for se-
lecting the panel pattern. Touch one of the pat-
terns from among those displayed on screen
to change the panel to the selected pattern.
p If you touch [Peak Hold Reset], the maxi-
mum and minimum (green line) values indi-
cated in [
Acceleration] and [Side
Acceleration] are reset.
p You cannot change the speedometer at the
center.
p Selecting Demo Mode in the Settings
menu enables you to perform a demonstra-
tion with random values.
Using XM Tuner and Other Information
En
76
Chapter
09