Paradyne COMSPHERE 3611 - Manual (Page 81)

COMSPHERE 3600 Series Data Service Units
Index-4 September 1996 3610-A2-GB48-50
Port Speed Options, 4-1
MCMP, 4-19
MCMP channel-to-port assignment, 4-19
TDM configuration, 4-20
power-up routine, 2-5
Prts>2: FEP Chan, message, D-5
R
rate adaption, D-1
reconfiguring ports, changing interface for Flex models,
2-5
Remote branch, 3-4
reset, Control branch, 3-12
RTS
AnStr Conflc message, D-5
FrcOn Requir message, D-5
TxCrr Conflc message, D-5
RTS Cntrl
for digital bridging, 4-16
for TDM/MCMP, 4-12
RTS/CTS Del
for digital bridging, 4-16
for TDM/MCMP, 4-13
RxCarrSel
for digital bridging, 4-16
for TDM/MCMP, 4-12
S
Share DevA
for digital bridging, 4-9
for MCMP Setup, 4-2
for TDM Setup, 4-6
Reqd message, D-5
Share DevB
for digital bridging, 4-10
for MCMP Setup, 4-3
for TDM Setup, 4-7
Inval message, D-5
SNA Diagnostic Interface. See LPDA-2
Status (Stat) branch, 3-4
Circuit Quality (CircQ), 3-5
DTE status, 3-5
Health and Status (H/S), 3-5
Identity (ID), 3-5
Terminal Power (TPwr), 3-5
status indicators, 3-3
Stop Bits, 4-11
switched-carrier emulation, 1-1
Sync to Async, Req message, D-5
T
TDM
capability, 1-1–1-2
changing DSD V.35 interface setting, 2-2
changing DSD V.35 interface setting, 2-4
changing the Flex interface, 2-2
features, 1-2
front panel, 3-2
port configuration options, 4-11–4-15
separating from DSU, 2-3
setup configuration options, 4-6–4-8
status indicators, 3-3–3-4
worksheets, B-1–B-8
TDM/Flex, reconfiguring interface, 2-5, 2-6
technical specifications, E-1–E-4
terminal power, status, 3-5
Test branch, 3-7
Abort, 3-7
Device Test (Devic), 3-7
Loopback (Lpbk), 3-8
testing, network verification, 2-6
tests
bit error rate test (BERT), 3-9
device, 3-7
dial tone (DTone), 3-9
digital, 3-9
end-to-end (EE), 3-9
loopback, 3-8
time division multiplexer. See TDM
Too Many Ports, message, D-5
top-level menu, A-1
troubleshooting, D-1
TxCarrSel
for digital bridging, 4-16
for TDM/MCMP, 4-12
U
Underspeed, 4-20
UpstrmPort
for digital bridging, 4-18
for TDM/MCMP, 4-15
V
V.13&MCMP Bckup, message, D-5
V.35 interface
changing to EIA-232, 2-2, 2-4–2-6
interconnect cable, 2-1
verification, testing network, 2-6
W
worksheets, configuration options, B-1–B-10