Paradyne Jetstream CPX-1000 - Manual (Page 7)

February 2003 iii
1000-A2-GN22-00 Table of Contents
Rack Requirements ...........................................................3-8
Tools and Supplies ......................................................3-9
Facility Connections and Cabling.............................3-9
Unpack and Inspect the CPX-1000 .....................................3-10
Inventory CPX Components ............................................... 3-11
Attach the Mounting Flanges..............................................3-12
Rack Mount the CPX ............................................................3-13
Mount the Splitter Assembly ..............................................3-16
Connect Plant Battery and Frame Ground........................3-16
Install Modules in CPX ........................................................3-19
Installing Additional Cards ...........................................3-22
Verify Hardware Installation...............................................3-23
Attach OC-3 ATM Cables ....................................................3-24
Attach Ethernet Cables.........................................................3-25
Attach MP Card to CP Cards ........................................3-25
Connect the CPX to the LAN ........................................3-25
Attach CP Redundancy Cable.............................................3-25
Attach the T-1/DS-1 Cables.................................................3-26
Attaching Cables to Octal T1 Modules ........................3-26
Attaching Cables to 12-Port T1 Modules.....................3-28
Attach the STS-1 Cables .......................................................3-30
Verify Cabling........................................................................3-32
Apply Power..........................................................................3-32
Check Plug-in Module Indicators.......................................3-33
Alarm Panel Indicators ..................................................3-34
Check the Fans.......................................................................3-34
Verify Remote Interface........................................................3-34
Connect JetCraft PC to CPX-1000 .................................3-34
Change CPX Default IP Address ..................................3-34
Verify CPX LAN Connection.........................................3-35
Provision the CPX-1000........................................................3-35