Portloop, Reboot, Restartsub – Paradyne Jetstream CPX-1000 User Manual
Page 137: Setactiveport, Setcdv, Setechocancel

February 2003
A-9
1000-A2-GN22-00
A. Using the Console
portloop
Establishes a voice path between two subscriber ports.
Cpx>
portloop on
— Establishes a voice path between the two
ports
Cpx>
portloop off
Disconnects a previously established portloop
reboot
Reboots the CP
Cpx>
reboot verify
restartsub
Sends a restart request to a subscriber
Cpx>
restartsub [
Where:
Wait until has no active calls (default)
Restart immediately
setactiveport
Sets the active port in an ATM port group
Cpx>
setactiveport
setcdv
Displays/sets ATM Cell Delay Variation (CDV)
Cpx>
setcdv—
Displays current Cell Delay Variation
Cpx>
setcdv
Sets a new Cell Delay Variation
Where:
= Maximum jitter to tolerate in received cells from
subscribers (in milliseconds)
setechocancel
Sets Echo Cancellation type for a given subscriber port
Cpx>
setechocancel
Sets Echo
Cancellation for one port on a subscriber
Cpx>
setechocancel all none|far—
Sets Echo
Cancellation for all ports on a subscriber
Note
This setting is a temporary override only and is overwritten by
any reprovisioning.