Admin console commands, Clearstats – Paradyne Jetstream CPX-1000 User Manual
Page 136

A. Using the Console
1000-A2-GN22-00
A-8
February 2003
sub
Displays subscriber summary or details.
Cpx>
sub—
Displays valid sub ranges
Cpx>
sub —
Displays detailed information for
Cpx>
sub
range
Admin Console
Commands
The administrator commands include all of the user commands
listed above, plus the additional commands available only to
administrators:
clearstats
Clears statistics for the component specified.
Cpx>
clearstats sys
Cpx>
clearstats ifg
Cpx>
clearstats ds1
fan
Sets or shows the status of the chassis fan speeds
Cpx>
fan — Displays the current speed of all
the PowerSupply fans
Cpx>
fan [1-3|all] stat — Displays the current
fan speed
Cpx>
fan [1-3|all] low|high — Sets the fan
speed to Low or High
Where:
all = all fans (the default)
clearstats
Clears statistics for the component specified
fan
Sets or shows the status of the chassis fan speeds
portloop
Establishes a voice path between two subscriber
ports
reboot
Reboots the CP
restartsub
Sends a restart request to a subscriber
setactiveport
Sets the active port in an ATM port group
setcdv
Displays/sets ATM Cell Delay Variation (CDV)
setechocancel
Sets Echo Cancellation type for a given subscriber
port
setlinelen
Sets the DS1 line length or Line Build Out (LBO)
tap
Tap/monitor H.110 time slots
vpath
Displays active voice path information