KORG Krome music workstasion 61key - Manual (Page 87)

Dynamic modulation, Common FX LFO Common FX LFO
83
Common FX LFO
Two Common FX LFOs are available for modulation
effects, such as choruses, filters, phasers, etc. Normally,
the phase of the LFOs of multiple modulation‐type
effects will not be synchronized even if you set them to
the identical Frequency, since the LFOs are being
generated independently.
However, if you select Common 1 or Common 2 for the
LFO Type parameter of a modulation‐type effect, the
effect will use the one of the common LFOs instead of
its own individual LFO. This allows you to use a single
Common FX LFO to control two or more modulation‐
type effects such as flanger, phaser, or auto‐pan with
the same phase. Since you can make independent
settings for LFO waveform and phase offset for each
effect, you are free to create complex combinations of
effects.
Stereo Flanger Common FX LFO1
Common FX LFO
Stereo Phaser
Stereo Auto Pan
Waveform = Triangle Frequency[Hz]
Reset Phase Offset = 0 [deg]
Waveform = Sine
Phase Offset = 0 [deg]
Waveform = Sine
Phase Offset = +90 [deg]
LFO Type = Common1
Generate original LFO waveform