KORG Krome music workstasion 61key - Manual (Page 61)

Recording Preparations for recording
57
Recording
Preparations for recording
Before you begin recording, make sure that the
memory protect setting in Global mode is turned
off. For details, please see “Protecting the
memory” on page 110.
Creating a Song
Before we can begin this example, we need to select an
empty song where we can record.
1. Press the SEQ button or MODE button to enter
Sequencer mode.
2. Choose “Song Select” (e.g., in the P0: Play/REC–
Program T01–08 page).
You can press the Song Select popup button, and
choose from a list.
3. Use the numeric keys to input the number of the
new song that you want to create, and press the
ENTER button. (For example, press the 1 switch
and then the ENTER button.) A dialog box will
appear.
If you pressed the Song Select popup to access the
Song No. dialog box, press the desired song number to
open the dialog box.
4. Use “Set Length” to input the desired number of
measures and press the OK button.
You can change the number of measures later if
desired. For details, please see “Set Song Length” on
page 176 of the Parameter Guide.
5. Press the OK button to create the song.
Tip: You can use the ENTER button instead of the OK
button.
Track settings
Since we’re going to record a new song in this example,
we will start by explaining how to assign a program to
each track, and adjust basic settings such as volume.
1. Assign a program to each track.
Use “Program Select” to assign a program to each
track. The method is the same as when assigning a
program to a timbre in a combination (see page 46).
You can copy various settings from Programs or
Combinations. (See pages 166, 167 of the Parameter
Guide.)
2. When assigning a program, you can use Track
Select to choose the track to which you wish to
assign a program, and audition the sound.
3. Set the pan and volume of each track.
Press the Mixer 1–8 tab (or the Mixer 9–16 tab) to access
the Mixer T01–08 page (Mixer T09–16 page).
• Pan sets the pan position of each track, and Volume
sets the volume level of each track.
4. Specify the tone generator and MIDI channel that
will be played by each track.
Press the PAGE button to access SEQ Page Select, and
press “P3 Track Parameters” The P3: Track Parameters
page will appear. Press the MIDI 1–8 tab (or the MIDI
9–16 tab) to access the MIDI T01–08 page (MIDI T09–16
page).
• Use Status to specify whether each track will play
the internal and/or external sound generator.
Normally when using the KROME, you will select INT
or BTH.
INT: During playback, the KROME’s internal tone
generator will play the MIDI data recorded on that
track. When you use the KROME’s keyboard or
Popup
Track Select
Location
Song Select
Meter
REC Resolution
Tempo
Tempo
Mode
Program Select,
& Popup
Category
Solo
Play/Mute/Rec