KORG Krome music workstasion 61key - Manual (Page 47)

43
Playing and editing Combinations
About the KROME’s combination s
Combinations let you split and layer up to 16 Programs
at once.
A Combination is made up of 16 Timbres (Note that
you don’t have to use all 16 Timbres). Each Timbre is
assigned a Program, along with parameters for key
range and velocity zones, mixer settings, MIDI channel
and controller filtering, and so on.
As with Programs, each Combination has five insert
effects, two master effects, and one total effect for
shaping and transforming the sounds of the individual
Timbres.
This section of the manual takes a quick look at playing
Combinations, including a tour of the front‐panel
controllers and basic editing techniques.
Playing combinations
Selecting Combinations
There are several different ways to select
Combinations. Each one is convenient in a different
way:
• Using “Combination Select” and the VALUE
controllers:
• Using the Bank/Combination Select menu:
• Using the Category/Program Select menu:
• Find
• Using a foot switch: page 19
• Sending MIDI program change messages to select
Programs remotely:
For details, please see below.
Selecting a program using
“Combination Select” and the VALUE
controllers
1. Press the COMBI button. (The LED will light up.)
(Refer to the illustration below for the buttons.)
Alternatively, you can use the mode button (see
“Selecting modes” on page 9).
The KROME will enter Combination mode.
2. Access the Combi P0: Play– Program T01–08 page.
This is shown in the top line of the display.
If a different page is shown, press the EXIT button
several times to move to the Combi P0: Play– Program
T01–08 page.
3. Make sure that “Combination Select” is selected.
If it is not, press “Combination Select” in the display to
highlight it.
4. Select the combination you want to play.
You can use the following methods to select a combination.
4: INC/DEC buttons
3: Combination Select
2: COMBI P0: Play
4: VALUE dial
1: COMBI button
4: Numeric keypads
ENTER button 5: BANK SELECT
A–F buttons
1: Mode name
(button)
Mode button Mode, page number
and name Tab name
Combination Select
(Combination number and name)
Category Select popup button
(Category number and name)
Bank
number
Combination Select popup button